> Exhaust Systems in Detail

Over the years a number of replacement and alternative exhaust systems for Lancia Montecarlos and Scorpions have appeared on the market. Here we will try and explain the differences between the various systems that we supply, and also provide a guide to compatibility between the various systems.

The original exhaust system consisted of three parts, manufactured in mild steel. The three pieces fit together as shown in the diagram on the right. Lancia haven't manufactured these systems for many, many years.

As an alternative we now supply a stainless steel system which is a direct replacement for the original exhaust. Stainless steel gives much longer life than mild steel and is not that much more expensive. For more information take a look at the next section.

REMEMBER - WHEN YOU FIT A NEW EXHAUST SYSTEM ALWAYS REPLACE THE EXHAUST MANIFOLD GASKET, BOTH THE EXHAUST MOUNTING STRAPS AND ALL THE MOUNTING NUTS.
FAILURE TO DO SO MAY INVALIDATE YOUR WARRANTY

Our standard stainless steel exhaust system consists of three parts, manufactured to the highest quality with top-grade materials. The three pieces fit together as shown in the picture on the right and each element is compatible with the original mild steel system shown above, so you can replace all or part of your existing system with stainless steel equivalents.

SS5101 Complete replacement system in stainless steel (all three parts)

We can also supply the individual components for this system:

SS5102 Twin pipe
SS5103 Join pipe
SS5104 Silencer (muffler)

Delivery time for these items is usually two to three weeks.

If you prefer to choose a sports system to improve throttle response, we also offer a choice of systems in stainless steel. For more information take a look at the next section.

REMEMBER - WHEN YOU FIT A NEW EXHAUST SYSTEM ALWAYS REPLACE THE EXHAUST MANIFOLD GASKET, BOTH THE EXHAUST MOUNTING STRAPS AND ALL THE MOUNTING NUTS.
FAILURE TO DO SO MAY INVALIDATE YOUR WARRANTY

Our stainless steel sports exhaust system features a 4-2-1 combined manifold and downpipe plus a twin-outlet silencer. This configuration provides much better extraction from the engine and thus improves power output. Top-quality manufacture plus high-grade materials. The two pieces fit together as shown in the picture on the right. The components of this system are COMPATIBLE with most systems originally manufactured by ANSA and CSC but they are NOT COMPATIBLE with the standard systems detailed above.

SS1701 Complete sports system in stainless steel

We can also supply the individual components for this system:

SS1702 Manifold and 4-2-1 down pipe
SS1703 Silencer (muffler)

Delivery time for these items is usually two to three weeks.

If you want an even more efficient exhaust system we can also supply a tuned extractor exhaust system designed by Guy Croft of GCRE. For more information take a look at the next section.

REMEMBER - WHEN YOU FIT A NEW EXHAUST SYSTEM ALWAYS REPLACE THE EXHAUST MANIFOLD GASKET, BOTH THE EXHAUST MOUNTING STRAPS AND ALL THE MOUNTING NUTS.
FAILURE TO DO SO MAY INVALIDATE YOUR WARRANTY








Another view of our stainless steel twin-pipe exhaust exhaust system showing how the pieces fit together. Note new exhaust straps and mounting bolts.

Our top-of-the-range stainless steel exhaust system was originally designed by the renowned Guy Croft and features a 4-2-1 extractor manifold with matched-length downpipes. The manifold is mated to a single-outlet silencer. This configuration provides the best possible extraction of exhaust gasses from the engine and provides the best power gain of any system we have seen. Top-quality manufacture plus high-grade materials. The system fits together as shown in the picture on the right. This system is only available complete and we are unable to supply individual components. It is NOT COMPATIBLE with any of the other systems detailed above.

PP1731 Complete Guy Croft system in stainless steel

Delivery time for these items is usually eight to ten weeks.

REMEMBER - WHEN YOU FIT A NEW EXHAUST SYSTEM ALWAYS REPLACE THE EXHAUST MANIFOLD GASKET, BOTH THE EXHAUST MOUNTING STRAPS AND ALL THE MOUNTING NUTS.
FAILURE TO DO SO MAY INVALIDATE YOUR WARRANTY
This component part
is compatible with these systems

MH5101
Standard
exhaust,
steel
SS5101
Standard
exhaust,
stainless
SS1701
Sports
exhaust,
stainless
CSC
exhaust
systems
ANSA
exhaust
systems
SS5102 Twin pipe
SS5103 Join pipe
SS5104 Silencer
SS1702 4-2-1 manifold
SS1703 Silencer



Copyright © 2005-2015 The Monte Hospital Limited

Unit 107, The Wincombe Centre, Wincombe Business Park, Shaftesbury, Dorset, SP7 9QJ, United Kingdom
Company registered in England no 04495595
VAT registration no GB 692 2077 26